|
 |
|
|
|
| |
|
|
Nut
Forming Machine
|
|
Salient
Features:-
|
|
|
For
trouble free running of the machine, the automatic,
centralised lubrication sysem provides adequatte
quantity of lubricant to all bearing surfaces.
|
|
|
All
the parts are perfectly covered for proper safety,longer
machine-life and lesser maintenance costs.
|
|
|
Specified
construction material is used. |
|
|
Increassed
productivity at lower operational cost and manpower.
|
|
|
Heavily
constructed for high stability. |
|
|
Machine
equipped with over-arm type ram, which is 3
times longer than that of conventional ones.
|
|
| |
|
Specification
|
|
MODEL
|
CAPACITY
OF A/F (MM)
|
OUTPUT
PCS./MIN.
|
MAIN
MOTOR
KW/HP
|
LUB.
& COOLING PUMPS
MOTOR KW/HP
|
MACHINE
WEIGHT
(KGS.) Approx.
|
REQUIRED
FLOOR SPACE
(L x B x H) (mts)
|
|
NF-17
|
17
|
100
|
11.00
|
15
|
.75
|
1
|
8700
|
3.00
x 1.90 x 1.40
|
|
NF-21
|
21
|
80
|
18.5
|
25
|
.75
|
1
|
15250
|
3.70x2.50x2.00
|
|
NF-24
|
24
|
75
|
30.00
|
40
|
.75
|
1
|
26500
|
4.10
x 3.00 x 2.5
|
|
|
| |
| |
|
|
| |
|
Salient
Features:-
|
|
|
Equipped
with pneumatic clutch and special electric safety
system, which stop the machine instenteniousely
in case of Air failure, Power failure or any accident,
unlike the conventional Header.
|
|
|
For
trouble free running of the machine, the automatic
centralized lubrication system provides adequate
quantity of lubricant to all bearing surfaces.
|
|
|
The
machine is provided with Gear & Pinion
to reduce electricity consumption, and thus economize
the operations.
|
|
|
The
installation of Motor, electrical drive and panels
have been done to make the machine user-friendly
and to reduce the initial installation time.
|
|
|
The
whole machine is perfectly covered for safety
longer machine-life and lesser maintenance costs.
|
|
Cold
Heading Machine |
| |
|
|
Automatic
stop in case of lower oil level or lower air pressure.
|
|
|
Increased
productivity at lower operational cost and manpower.
|
|
|
Heavily
constructed for high stability. |
|
|
Machine
equipped with over-arm type ram, which is 3 times
longer than that of conventional ones. Therefore,
our headers are most suitable for forging precision
parts |
|
|
| |
|
Specification
|
|
MODEL
|
CAPACITY
OF A/F (MM)
|
SHANK
LENGTH (MM)
|
OUTPUT
PCS./MIN.
|
MAIN
MOTOR KW/(H.P.)
|
MACHINE
WEIGHT(KGS.) Approx.
|
REQUIRED
FOOR SPACE
L x B X H (meters)
|
|
TM
- 16
|
24
|
150
|
45
|
3.70/5.0
|
3500
|
2.25x1.45X1.60
|
|
TM
- 20
|
30
|
150
|
40
|
5.50/7.5
|
4325
|
2.52x1.65x1.70
|
|
TM
- 24
|
36
|
150
|
40
|
5.50/7.5
|
6800
|
2.80x1.85x2.30
|
|
TM
- 30
|
45
|
150
|
30
|
7.50/10.0
|
8500
|
3.00x2.00x2.75
|
|
| |
| |
|
|
| |
|
Trimming
Machine
|
|
Salient
Features:-
|
|
|
Equipped
with pneumatic clutch and special electric safety
system, which stop the machine instantaneously
in case of Air failure, Power failure or any accident,unlike
the conventional machines.
|
|
|
For
trouble free running of the machine, the automatic,
centralised lubrication system provides adequate
quantity of lubricant to all bearing surfaces.
|
|
|
Considerable
reduction in initial installation. |
|
|
All
the parts are perfectly covered for safety,longer
machine - life and lesser maintenance costs
|
|
| |
|
Specification
|
|
MODEL
|
WIRE
DIA (MM)
|
SHANK
LENGTH (MM)
|
OUTPUT
PCS./MIN.
|
MAIN
MOTOR KW/(H.P.)
|
MACHINE
WEIGHT (KGS.) Approx.
|
REQUIRED
FLOOR SPACE
BxLxH (meters)
|
|
DBH-16
|
16
|
150
|
50
|
15.00/20
|
9.000
|
3.25x2.10x2.20
|
|
DBH-20
|
20
|
150
|
40
|
22.00/30
|
15.000
|
3.75x2.46x2.23
|
|
DBH-24
|
24
|
150
|
35
|
30.00/40
|
27.000
|
4.60x2.75x2.50
|
|
DBH-30
|
30
|
150
|
30
|
37.00/50
|
32.000
|
5.75x3.25x3.65
|
|
|
| |
|
|
Note
:
The
designs are subject to modification and improvement without
notice. |
|
| |
|
|
